top of page

POWER PEDAL
INDOOR BIKE POWER SENSOR

PP pair main.png

How to assemble the Power Pedals

  • STEP 1: Fit the metal gasket to the toe cage and attach to the pedal using 2 screws. Use a Philips (cross head) screw driver to tighten the screws. Do not over tighten. Repeat the process for each pedal.​

  • ​​STEP 2: Feed the foot strap through the underside of the pedal and join the buckle at the side.​

How to install the Pedals on a bike

  • ​​​STEP 3: Attach the Right Pedal to the Right Crank: Tighten the Right Pedal Clockwise (facing the pedal)

​​

  • STEP 4: Attach the Left Pedal to the Left Crank: Tighten the Left Pedal Counter-clockwise (facing the pedal)

​​​​​​

  • Use a 15mm spanner (wrench) to tighten the pedal axle to approximately 35-50 Nm (30-35 ft lb). This is the standard torque for many bike pedals. Check the bike manufacturers guidelines.

How to Pair with the Cardiosport Console

  • ​​​STEP 4: Rotate the pedals by pedalling to wake them up and ready to connect to a bike computer and or Smart phone App, Smart Watch.

How to Pair with Zwift

  • Follow the pairing process on the Zwift home page. Ensure your device Bluetooth is turned on. 

  • Start pedalling to activate the pedals and wake them up and the follow the steps in the video. 

How to Pair with CicloZone

  • Follow the pairing process on the CicloZone setup page. Ensure your device Bluetooth is turned on. 

  • Start pedalling to activate the pedals and wake them up and the follow the steps in the video. 

How to Pair to a Garmin watch

  • Follow the pairing process for sensors and accessories on your Garmin watch. ​​​Keep pedalling to activate the pedals and search sensors and accessories, 'Add new' and select 'Power'

  • The Power Pedals will be displayed as PWR - 1234. The 4 digit number will be different and unique to your pedal.

How to Pair to a Apple Watch SE

  • Follow the pairing process in the video for Apple Watch SE. Currently ONLY Apple Watch SE supports Power Sensor connectivity. 

  • Go to indoor cycle settings to configure the workout pages to display Power (Watts). 

How to remove the Pedals from a bike

  • ​​​Use a 15mm spanner (wrench) to loosen the Power Pedals.

  • To remove the Right Pedal, rotate the Pedal Counter-clockwise (facing the pedal)

  • To remove the Left Pedal, rotate the Pedal Clockwise (facing the pedal)​​​​​​​

bottom of page